Send Inquiry Send SMS

Switchgear Test Equipment

60KV DC Vacuum Bottle Test Set


Power Mains ON ï OFF switch & Fuse.

'HTï ON & 'HTï OFF push buttons.

Lamp indication: Power Mains ON, HT ON, ACCEPTABLE (Green), DEFECTIVE (Red) ,OVERVOLTAGE.

Knob for continuous variation of the output test voltage up to the required voltage level.

4-Key matrix keyboard for setting of test parameters.

Resistive self-discharging.

Transient Tripping current set at 2.5mA.

Last applied test voltage latched & indicated in the LCD on tripping of HT circuit.

Metering: The LCD will indicate the status.....

Voltage in KV, leakage current in mA, Test time (Dwell time)

Accuracy of voltage measurement : ± 3% of FS,

Resolution: 0.1kV.

Accuracy of leakage current measurement : ± 3% of FS

Resolution: 0.01mA.

Protection & Interlock:

Zero start interlock

Automatic tripping mechanism against over loading.

Over voltage Indication.

DC High Voltage Assembly Unit:

HV Transformer & DC HV Block mounted on MS trolley within Insulated jacket.

The Transformer & DC HV Block cast resin type.

Designed to withstand frequent intermittent spark over or short circuit conditions

Series resistance to limit inrush of current at the output.


3-pin Input Power cord with plug-3M - 1 No.

Interconnecting cables between the units-3M - 1 No.

Discharge rod with grounding cable-5M - 1 No.

Ground cable-3M - 2 Nos.

High voltage return cable of minimum length-5M. - 2 Nos.

Carrying case/bag for accessories. - 1 No.


Operation Manual(Instruction Manual)

Works Test Report

Warrantee Certificate

Approx. Dimension in mm.

Length (L) X Width (W) X Height (H)

1. Control & Measurement Unit : 390mX296mmX170mm

2. DC HV Assembly Unit : 405mmX380mmX430mm

HT terminal (Dettachable) : Length: 400mm

Diameter: 50mm

Approx. Weight in Kg.

1. Control & Measurement Unit : 7.5Kg.

2. DC HV Assembly Unit : 32Kg.

Power Cable Fault Locator

We are one of the leading manufacturers, exporters of suppliers of a premium quality range of Cable Fault Locator that is extensively used to trace and locate the fault of underground cables. This fault locator is manufactured at our hi-tech manufacturing unit as per international quality standards under the supervision of our professionals using superior quality components. Offered fault locator is made available in different specifications to meet the diverse requirements of the clients. Our honorable clients can avail this Cable Fault Locator from us at industry-leading prices.


  • Low maintenance
  • Durability
  •  Robust design
  • Non-interrupted performance
Available range:
  • DC HV Proof Test Set
  • Cable Fault Locator (Bridge Type) with Built-in HV Power Supply, 2.5 / 5 KV
  • DC Fault Burner
  • DC HV Proof Test cum Fault Burner & Surge Generator
  • Thyristor Thumper


117, Mishrapara Road, Rathtala, P.O. Rajpur,
Kolkata - 700 149, West Bengal, India.
trade india member
NEO TELE-TRONIX PVT. LTD. All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Private Limited.