60KV DC Vacuum Bottle Test Set

Product Description

Feature:

Power Mains ON ï OFF switch & Fuse.

'HTï ON & 'HTï OFF push buttons.

Lamp indication: Power Mains ON, HT ON, ACCEPTABLE (Green), DEFECTIVE (Red) ,OVERVOLTAGE.

Knob for continuous variation of the output test voltage up to the required voltage level.

4-Key matrix keyboard for setting of test parameters.

Resistive self-discharging.

Transient Tripping current set at 2.5mA.

Last applied test voltage latched & indicated in the LCD on tripping of HT circuit.

Metering: The LCD will indicate the status.....

Voltage in KV, leakage current in mA, Test time (Dwell time)

Accuracy of voltage measurement : ± 3% of FS,

Resolution: 0.1kV.

Accuracy of leakage current measurement : ± 3% of FS

Resolution: 0.01mA.

Protection & Interlock:

Zero start interlock

Automatic tripping mechanism against over loading.

Over voltage Indication.

DC High Voltage Assembly Unit:

HV Transformer & DC HV Block mounted on MS trolley within Insulated jacket.

The Transformer & DC HV Block cast resin type.

Designed to withstand frequent intermittent spark over or short circuit conditions

Series resistance to limit inrush of current at the output.

Accessories:

3-pin Input Power cord with plug-3M - 1 No.

Interconnecting cables between the units-3M - 1 No.

Discharge rod with grounding cable-5M - 1 No.

Ground cable-3M - 2 Nos.

High voltage return cable of minimum length-5M. - 2 Nos.

Carrying case/bag for accessories. - 1 No.

Documents:

Operation Manual(Instruction Manual)

Works Test Report

Warrantee Certificate

Approx. Dimension in mm.

Length (L) X Width (W) X Height (H)

1. Control & Measurement Unit : 390mX296mmX170mm

2. DC HV Assembly Unit : 405mmX380mmX430mm

HT terminal (Dettachable) : Length: 400mm

Diameter: 50mm

Approx. Weight in Kg.

1. Control & Measurement Unit : 7.5Kg.

2. DC HV Assembly Unit : 32Kg.